Drilling
Brand: ALPEN
MPN: ALP18108
HSS JOBBER DRILLS, DIN 338
RN
DRILLS FOR METAL
HSS
SUPER - Ø 8 mm
Single Pack
Range of application:
HSS twist drill ground from solid, bright finish: toughness and precision combined
with excellent cutting efficiency for drilling alloyed carbon and plain steel.
Strengths
Tight tolerances and high rotational accuracy
Precision ground
High quality steel grade
Break-resistant
Keen-edge
Sharp edge
Break-resistant
Prec..
N$ 161.58
Ex VAT:N$ 140.50
Brand: ALPEN
MPN: ALP181085
HSS JOBBER DRILLS, DIN 338
RN
DRILLS FOR METAL
HSS
SUPER - Ø 8,5 mm
Single Pack
Range of application:
HSS twist drill ground from solid, bright finish: toughness and precision combined
with excellent cutting efficiency for drilling alloyed carbon and plain steel.
Strengths
Tight tolerances and high rotational accuracy
Precision ground
High quality steel grade
Break-resistant
Keen-edge
Sharp edge
Break-resistant
Pr..
N$ 200.68
Ex VAT:N$ 174.50
Brand: TORK CRAFT
MPN: T AD0345
Tork Craft Drill Bit Adaptor Set — 3 pc (3/4/5 mm) Grub-Screw Type, 1/4' Hex Shank (Model T-AD0345)
Convert small round-shank bits to quick-change convenience. The Tork Craft T-AD0345 set includes three adaptors with 3 mm, 4 mm and 5 mm female round sockets and a positive grub-screw lock, each with a 1/4' hex drive for impact drivers and drill chucks. Ideal for precision bits, pilot drilling and workshop versatility.....
N$ 239.20
Ex VAT:N$ 208.00
Brand: TORK CRAFT
MPN: T CS005
Countersink 5 Piece Set with Bit Holder
The odd number of flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drilling or tapping operation thereby improving the finish of the product and removing any hazardous sh..
N$ 262.78
Ex VAT:N$ 228.50
Brand: TORK CRAFT
MPN: T CS101
Countersink HSS - 5Flute 6mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drilling or t..
N$ 106.72
Ex VAT:N$ 92.80
Brand: TORK CRAFT
MPN: T CS102
Countersink HSS - 5Flute 3/8” 10mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 114.08
Ex VAT:N$ 99.20
Brand: TORK CRAFT
MPN: T CS103
Countersink HSS - 5Flute 1/2” 12mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 119.03
Ex VAT:N$ 103.50
Brand: TORK CRAFT
MPN: T CS104
Countersink HSS - 5Flute 5/8” 16mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 162.15
Ex VAT:N$ 141.00
Brand: TORK CRAFT
MPN: T CS105
Countersink HSS - 5Flute 5/8” 19mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 209.88
Ex VAT:N$ 182.50
Brand: TORK CRAFT
MPN: T CS201
Carbon Steel Countersink - 1/4” (6.35mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 54.05
Ex VAT:N$ 47.00
Brand: TORK CRAFT
MPN: T CS202
Carbon Steel Countersink - 3/8” (9.5mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving th..
N$ 57.73
Ex VAT:N$ 50.20
Brand: TORK CRAFT
MPN: T CS203
Carbon Steel Countersink - 1/2” (12.7mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 60.03
Ex VAT:N$ 52.20